| W x D x H |
" x " x 311/2"
|
| Power Output | 5.5 N/A |
| Power Input Type | None |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Certifications |
![]() ![]() ![]() |
DIS-ET Shelleymatic
Drop-In Even Temp Heated Dish Dispensers
| High impact plastic guide posts mounted to flange |
|
Capacity
Capacity of tubes shall be approximately 72 dishes, with a maximum stacking height of 24.00" (61cm). |
| Top flange, bottom brace and vertical side channels are stainless steel |
| Flange, channels and bottom to be integrally welded |
| Spring supports to be stainless steel |
| Carrier head made of welded rods with a removable top plate |
| Self-leveling mechanism, field adjustable by adding or removing springs |
|
Exterior
Dispenser tube shall have three vertical side channels, bottom brace and top supporting flange of stainless steel. Flange, channels and bottom brace shall be integrally welded together. Flange shall have 3 guide posts molded from high impact plastic. |
|
Self-Leveling
Self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs on perimeter of vertical side channels. The dish carrier head shall be stainless steel welded rods with a removable stainless steel top plate. Tube shall suspend in a 28.00” (71cm) high space. |
| 4’ cord and plug |
| Convection heating module and fan motor |
| Filtered air intake |
| On/off switch and adjustable thermostat |
| Outer stainless steel jacket |
| ET temperature range is 120-140°F (49-60°C) |
|
DIS-ET
DIS-ET Even Temp heated dispensers have a stainless steel outer jacket. Unit shall be supplied with 4’0” (1.2m) cord and NEMA 5-15P plug. Electrical connections shall be 120 volt, 60 hertz, single phase. The tube shall have its own convection heating module consisting of a single 700 watt heating element and fan motor, located in the center of the interior bottom cavity. Air intake has a filter. The tube shall have an adjustable thermostat inside the motor housing and an ON/OFF switch on one of the dish guide posts. Unit requires a minimum of 1” (2.5cm) clearance at bottom for air circulation. Unit shall maintain temperature between 120°F–140°F (49°C–60°C). |
DIS-ET Shelleymatic
DIS-500-ET
| W x D x H |
817/64" x 817/64" x 311/2"
|
| Weight |
19 lb
|
| Power Input Type | None |
DIS-575-ET
| W x D x H |
9" x 9" x 311/2"
|
| Weight |
20 lb
|
| Power Input Type | None |
DIS-650-ET
| W x D x H |
927/32" x 927/32" x 311/2"
|
| Weight |
21 lb
|
| Power Input Type | None |
DIS-725-ET
| W x D x H |
105/8" x 105/8" x 311/2"
|
| Weight |
23 lb
|
| Power Input Type | None |
DIS-813-ET
| W x D x H |
1127/64" x 1127/64" x 311/2"
|
| Weight |
25 lb
|
| Power Input Type | None |
DIS-913-ET
| W x D x H |
1219/32" x 1219/32" x 311/2"
|
| Weight |
27 lb
|
| Power Input Type | None |
DIS-1013-ET
| W x D x H |
1325/64" x 1325/64" x 311/2"
|
| Weight |
29 lb
|
| Power Input Type | None |
DIS-1200-ET
| W x D x H |
1523/64" x 1523/64" x 311/2"
|
| Weight |
32 lb
|
| Power Input Type | None |
DIS-1450-ET
| W x D x H |
1723/32" x 1723/32" x 311/2"
|
| Weight |
37 lb
|
| Power Input Type | None |
12" Dispenser12.00” (30cm) dia. stainless steel dish dispenser tray (DIS-1200 only) |
|
CoverStainless steel tube cover (500-725 sizes only) |
|
Cover with AccessStainless steel cover with access to dishes (-813 through -1450 sizes only) |
|
LengthShorten dispenser tubes to special length |
|
RodsNon-marring adjustment rods for oval dishes and various dish diameters (813 through 1450 sizes only)Optional adjusting rods are available on 813–1450 models and installed by factory only. They reduce the maximum round dish diameter by 1.25” (3cm). The rods can be adjusted to decrease the diminished maximum round dish diameter by 1.50” (4cm). |



